Skip to content

Podcast editing in Premiere Pro

How to auto switch podcast camera angles in Premiere Pro

A two-hour, three-camera podcast is at least two hours of switching by hand. Here is the manual workflow in Premiere, and how to have the switching done from each person’s mic.

Updated November 4, 2026

Adobe Premiere® cannot yet switch camera angles on its own based on who is speaking. Editors are still asking Adobe for it: a feature request posted on the Adobe Community in January 2026 asks for exactly that, and it is open for voting (Adobe Community). So you have two choices. Cut the multicam sequence yourself, which works well and is described step by step below, or use a plugin that reads the audio and does the switching. StoryPull’s Podcast mode is one, and it also takes out dead air and trims the episode to a target length.

Before you start: one mic per person

Whether you switch by hand or automatically, the cleanest podcast edits come from a separate mic for every person, recorded to its own track or file. Then the loudest mic at any moment tells you who is talking, and you can mix each voice on its own. Camera audio is still useful as scratch sound to sync to, so leave it on.

The manual way in Premiere

1. Sync the cameras and mics

Select every camera clip and audio file for the episode in the Project panel, right-click and choose Create Multi-Camera Source Sequence. Set the synchronize point to Audio so Premiere lines the files up by their waveforms (Adobe). If the recording was stopped and restarted, or a camera rolled in several pieces, sync can get fiddly. On a shoot with many cameras and recorders, GenLock syncs the whole timeline by sound in one press, without timecode or a reference clip, and our guide to audio sync in Premiere covers the options.

2. Make the multicam sequence

Right-click the multi-camera source sequence and choose New Sequence From Clip. In the Program Monitor, add the Toggle Multi-Camera View button from the button editor and turn it on: you now see every angle at once, numbered (Adobe).

3. Switch angles in real time

Play the sequence and press the number key for the camera you want as each person speaks. Premiere cuts to that angle at the moment you press. This is a live performance, so for a long episode plan on at least one full pass at playback speed, plus pauses for the parts you miss.

4. Fix the switch points

To change the angle on a section, select it on the timeline and click a different camera in the Program Monitor. Use the Rolling Edit tool to slide a switch earlier or later, so each cut lands as the new speaker starts rather than a beat after (Adobe). Add a wide shot every so often, especially when two people talk over each other.

5. Tighten the episode

Remove the pre-show chatter, the false starts and the tangents by hand, and close long silences. Premiere’s Text-Based Editing can find pauses and filler words in a sequence transcript and delete them in bulk (Adobe), though on a multicam sequence it is worth checking each removal, because a gap closed on one track has to close on every track.

The automatic way: StoryPull Podcast mode

StoryPull is a panel inside Premiere. Its Podcast tab does the sync, the switching and the silence pass when you press one button, then trims the episode with AI if you want it shorter.

Prepare

  1. Pick the sequence with your episode from Load a Sequence, or drag a bin onto Drag & Drop a Bin.
  2. Set Speakers to the number of people on the show.
  3. Leave Auto Link Mic Track on to have StoryPull sync each external mic to the camera scratch audio and match each mic to its speaker. It needs scratch audio on the cameras to sync against. Turn on Multiple Clips Per Person if one person has more than one camera on them, and pick those cameras.
  4. Tick Wide Shots if you have a wide angle, and set the Wide Shot Frequency. You choose which camera is the wide; StoryPull does not guess it.

AutoSwitch

AutoSwitch reads every person’s mic levels to work out who is speaking, and cuts to that person’s camera. Wide shots land on pauses between sentences rather than in the middle of a word. Switch Sensitivity runs from Calm, with fewer and longer shots, to Reactive, which follows the conversation more closely.

Remove Silence

Turn on Remove Silence and pick a Silence Tuning: Constant, Natural or Relaxed, depending on the rhythm your show should have. Then press Load + AutoSwitch. StoryPull builds the switched, tightened episode as a new sequence in your project. These steps make no AI generation, so they use no credits.

AI Trim, when the episode must be shorter

Set a target duration and press AI Trim. StoryPull takes out pre-show chatter, false starts, tangents and repeated points, keeps each question with its answer, and keeps everything in the order it was said. AI Trim reads episodes up to 80,000 words, roughly 7 to 9 hours of conversation. Each AI Trim is one generation and uses AI credits (what the credits mean).

Already started the edit?

Turn on Use Pre-cut Sequence to run AI Trim on a sequence you have already built. Music, sound effects, lower thirds and B-roll on other tracks stay in sync with the dialogue.

When automatic switching is not the right tool

  • Everyone on one mic. AutoSwitch decides who is talking from each person’s own mic. People who share one mic cannot be told apart that way, so they need to share a camera too. Podcast mode can still remove silence and trim.
  • A single camera. There is nothing to switch. Remove Silence and AI Trim still save the tightening pass.
  • A show switched live. If a hardware switcher already cut the program feed, you only need the trim.
  • Requirements. Adobe Premiere 2026 (26.5) or later, on macOS 14 or later, Apple silicon or Windows 10 or 11, 64-bit.

However the switching is done, watch the result once. An automatic edit is a first pass that gets the camera right most of the time, and the moments where you want a reaction shot instead of the speaker are still a human decision.

Turn the episode into shorts

Once the episode is switched, StoryPull’s Shorts mode can cut up to ten vertical clips from it, each switching cameras to whoever is talking. See how to make podcast shorts in Premiere. For interviews rather than conversations, see how to rough cut interviews faster.

Try it on your own episode

Try every tool free for 7 days, with 100 AI credits (about 10 generations). The StoryPull page shows AutoSwitch and AI Trim on a real podcast, and pricing has the plans.

Sources